Products / Film and Photo Scanners / OpticFilm 135i
| Image Sensor | CCD |
|---|---|
| Light Source | LED |
| Hardware Resolution | 7200 dpi |
| Scan Modes | Color: 48-bit input, 24/48-bit output Grayscale: 16-bit input, 8/16-bit output |
| Dynamic Range | 3.4 |
| Infrared | Built-in |
| Action Button | Eject button, Scan buttons x 3 (Positive, Negative, Custom) |
| Scanning Speed | Approx. 52 seconds for maximum scanning area color at 600 dpi (IR enabled) Approx. 360 seconds for maximum scanning area color at 3600 dpi (IR enabled) Remark: Approx. 25 minutes for maximum scanning area at maximum resolution: 7200dpi (IR enabled) |
| Net Weight | 1.56 Kgs (3.49 Lbs) |
| Scanning Area (W x L) | 35 mm x 226 mm (1.37" x 8.9") Remark: 35 mm film strip and slide |
| Operating System | Windows 7 (64bit)/ 8 (64bit)/ 10 (64bit) / 11 Mac OS X 10.10.x/ 10.11.x/ 10.12.x/ 10.13.x/ 10.14.x/ 10.15.x/ 11.x/ 12.x/ 13.x/ 14.x |
| Power Supply | 24 Vdc/ 0.75A |
| Interface | USB 2.0 |
| Dimensions (W x D x H) | 175 mm x 259.2 mm x 104.3 mm (6.9" x 10.2" x 4.1") |
| Hardware Requirements | Windows PC & Mac Intel i5 CPU or faster 4 GB RAM main memory (8 GB RAM recommended) 20 GB free space on hard disk drive CD/ DVD drive or internet connection |
| Bundled Software | Plustek QuickScan Plus |
Frequently Asked Questions
- Does OpticFilm 135i support to scan panoramic film?
- How should I proceed if my computer or QuickScan Plus cannot detect the scanner?
- How to enable remove scratch and dust function?
- How to install OpticFilm 135i scanner on your computer?
- The scanner doesn't work properly when I press the button. What should I do?
- What should I do when the slide image is not clear or blurred?
- Where can I get the latest driver?
- Why can't I set 7200 dpi under custom mode?